The Kverneland Ecomat and The Ecomat Seeder has been tested in three different field studies. All the studies were conducted on soils with different clay content during 2005 in Säby outside Uppsala. In one of the trial spring ploughing with the Ecomat and spring ploughing and seeding with Ecomat Seeder were compared with conventional autumn mouldboard ploughing and spring mouldboard ploughing to conventional depth (22-23 cm). In this study the quality of the seedbed, the number of emerged plants and weeds, the pentration resistance and the yield were examined. Shallow spring ploughing (10 cm) with the Kverneland Ecomat has shown to be a good alternative to conventional autumn ploughing when growing spring crops. During the season 2005 tilling with the Ecomat resulted in a higher yield than conventional ploughing. In 2002-2005 the average yield for shallow spring ploughing was 4 percent higher than after conventional autumn mouldboard ploughing and 10 percent higher than after spring mouldboard ploughing to conventional depth (22-23 cm). In the other two studies, ploughing to different depth in the autumn with the Ecomat was compared with conventional mouldboard ploughing and stubble discing.

This master thesis work was done by two students at Machine Design at KTH for Lesjöfors Stockholmsfjäder AB. The task was to develop a calculation program for gas springs. The program is going to ease the selection of gas springs for a given case of a lid that should be opened. The program is going to be used internal by sales people at Lesjöfors AB in Sweden and internationally. The program is therefore written in English.The program was developed in Microsoft Visual C# 2008 Express Edition.

The aim of this undergraduate thesis was to formulate advices regarding the use of field beans, cultivated together with spring wheat, as whole-crop silage in feeding to dairy cows. In the thesis, optimal harvest time of the field bean/spring wheat crop, as well as the feeding value and the fermentation quality, was studied. On the research station at Röbäcksdalen in Umeå field bean/spring wheat (70 % respective 30 % of normal seed rate for the pure crop) and pea/oat (70/30) was grown in field experiments both 2002 and 2003. The following year, 2004, the pea/oat crop was excluded and instead field bean and spring wheat was cultivated in three different mixed ratios (field bean/spring wheat; 100:0, 70:30, 30:70). Every year the crops were harvested at four different development stages and the green forages were used in ensiling experiments.

For centuries, springs have played a significant role in our society as water supplies, reasons for where to settle down, and in folklore. There are different reasons why and where a spring forms, e.g. in what kind of soil it has its outflow. Geographic and geochemical surroundings have an influence on spring-water quality.For this project some of the springs in the Lagga perish, Knivsta municipality, Sweden, were selected for a closer study. Water samples were collected from springs for analysis.

This report presents an independent thesis corresponding 15hp and was carried out on Högskolan in Halmstad during the spring of 2014. The thesis is the final course which ends a three-year mechanical engineering program with focus on technical design.The thesis started in an operation which electricians are exposed to every day. The operation in question is cable laying or wiring. The tool they use is called a tension spring and is a long and stiff wire, usually made out of nylon or fiberglass. The tension spring is fed through pipes in the walls and brings the desired cables with it on the way back.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

BRP Systems utvecklar och säljer affärssystem till mindre och medelstora tjänsteföretag. Huvudsystemet är en Java Swing-applikation och för att få bättre struktur på programmet önskar man vid utvecklingen använda ett lämpligt ramverk om något sådant går att identifiera. Denna rapport undersöker två sådana ramverk.Ett ramverk kan användas som hjälp vid utvecklingen av komplexa applikationer. De fungerar som en grund till applikationen som utvecklas och kan erbjuda olika hjälpfunktioner som ofta behövs i vanliga program. Ramverk kan även få källkoden att bli mer strukturerad och lättunderhållen.

This study investigates a farm in Dalarna which includes 16 ha of farmland and 1, 7 ha of pasture. The purpose is to find out if it is possible to start an animal production in Dalarna. The study is set only to compare spring lamb production with nurse cow production. There are two buildings on the farm that can be used for this purpose. One is an old cowshed, and the other is an unused silo for silage with a roof on top. Both of the buildings are compared to every alternative in the calculations.

The purpose of this project is to get a fully functional, automatic steering system and a variable breaking system with an emergency breaking function to an off road vehicle. This off road vehicle is supposed to work as an aid in military situations. A team of two, Sebastian Attervall and Nichlas Gustafsson, got an order from Jonas Nyårds and the PreeRunners Project to construct a steering system that could manoeuvre an off road vehicle without any human involvement. To make this possible the vehicle would be guided by onboard sensors, cameras and computers. The team where also assigned to construct an automatic breaking system, there also no human would be involved.

This thesis is built on a field study that was carried out in two seed-tree stands near by Götbrunna in Uppland, Sweden. The aim was to examine if scarification carried out in spring time could generate a more dense seedling establishment when using natural generation, than scarification carried out in autumn. It was also investigated whether there were differences in mortality the first season between the two plot-types. Plots were established block-wise with 50 blocks (pairs) on each site. The spring scarification was made with a hoe during 22-23 of April.

70 % of the lakes and waters in the water district of northern Baltic Sea do not reach the requirements for good ecological status. This is mostly due to eutrophication caused by a too high deliverance of nutrients from agricultural land or effluents. Losses of particulate phosphorus through water erosion contribute to a great extent to this eutrophication. In the action plan for the water district cover crops are mentioned as a measure for reducing losses of phosphorus from arable land. This paper reviews the possible effect of cover crops in the water district and discusses what crop that would be most suitable.

Regeneration with scarification and planting is a well known method, but the plants have a tuff period in the beginning. Decease of plants comes from pine weevils, dry weather, browsers, wrong method of scarification and wrong time for the planting. These are some courses why not every planting gets successful. The purpose with this study is to investigate witch time of planting gives the best result, spring or autumn planting and to give a answer of witch factors are the main course of deceases. The goal is to have the study to decide witch time to plant after final felling. The choices of plantings were maid from a period of three years. Spring plantings were from year 2005, 2006 and 2007 and autumn plantings were from 2004, 2005, and 2006.The purpose was to compare differences in deceases at the same spring weather.

In my work I have chosen to examine the profitability for small scale production of hemp briquettes. My study also includes a review of which briquette technique that is the most common one among small scale producers. The reason that I have chosen this subject is because of the discussions about climate and energy that we face almost every day. I also think the subject is extra interesting in these days when the grain prizes are at a historic high level. In order for me to achieve a reliable report, a hemp and briquette producer has given me the actual data from his farm. In that way I have been able to make my calculations from a concrete perspective.